This tutorial refers to examples that are available in the Lookahead directory under the examples directory of the release. Currently, this page is a copy of the contents of the README file within that directory.
We assume that you have already taken a look at some of the simple examples provided in the release before you read this section.
The job of a parser is to read an input stream and determine whether or not the input stream conforms to the grammar.
This determination in its most general form can be quite time consuming. Consider the following example (file Example1.jj):
void Input() :
{}
{
"a" BC() "c"
}
void BC() :
{}
{
"b" [ "c" ]
}
In this simple example, it is quite clear that there are exactly two strings that match the above grammar, namely:
abc abcc
The general way to perform this match is to walk through the grammar based on the string as follows. Here, we use "abc" as the input string:
As the above example indicates, the general problem of matching an input with a grammar may result in large amounts of backtracking and making new choices and this can consume a lot of time. The amount of time taken can also be a function of how the grammar is written. Note that many grammars can be written to cover the same set of inputs - or the same language (i.e., there can be multiple equivalent grammars for the same input language).
For example, the following grammar would speed up the parsing of the same language as compared to the previous grammar:
void Input() :
{}
{
"a" "b" "c" [ "c" ]
}
while the following grammar slows it down even more since the parser has to backtrack all the way to the beginning:
void Input() :
{}
{
"a" "b" "c" "c"
|
"a" "b" "c"
}
One can even have a grammar that looks like the following:
void Input() :
{}
{
"a" ( BC1() | BC2() )
}
void BC1() :
{}
{
"b" "c" "c"
}
void BC2() :
{}
{
"b" "c" [ "c" ]
}
This grammar can match "abcc" in two ways, and is therefore considered "ambiguous".
The performance hit from such backtracking is unacceptable for most systems that include a parser. Hence most parsers do not backtrack in this general manner (or do not backtrack at all), rather they make decisions at choice points based on limited information and then commit to it.
Parsers generated by Java Compiler Compiler make decisions at choice points based on some exploration of tokens further ahead in the input stream, and once they make such a decision, they commit to it. i.e., No backtracking is performed once a decision is made.
The process of exploring tokens further in the input stream is termed "looking ahead" into the input stream - hence our use of the term "LOOKAHEAD".
Since some of these decisions may be made with less than perfect information (JavaCC [tm] will warn you in these situations, so you don't have to worry), you need to know something about LOOKAHEAD to make your grammar work correctly.
The two ways in which you make the choice decisions work properly are:
There are 4 different kinds of choice points in JavaCC:
Remember that token specifications that occur within angular brackets <...> also have choice points. But these choices are made in different ways and are the subject of a different tutorial.
The default choice determination algorithm looks ahead 1 token in the input stream and uses this to help make its choice at choice points.
The following examples will describe the default algorithm fully:
Consider the following grammar (file Example2.jj):
void basic_expr() :
{}
{
<ID> "(" expr() ")" // Choice 1
|
"(" expr() ")" // Choice 2
|
"new" <ID> // Choice 3
}
The choice determination algorithm works as follows:
if (next token is <ID>) {
choose Choice 1
} else if (next token is "(") {
choose Choice 2
} else if (next token is "new") {
choose Choice 3
} else {
produce an error message
}
In the above example, the grammar has been written such that the default choice determination algorithm does the right thing. Another thing to note is that the choice determination algorithm works in a top to bottom order - if Choice 1 was selected, the other choices are not even considered. While this is not an issue in this example (except for performance), it will become important later below when local ambiguities require the insertion of LOOKAHEAD hints.
Suppose the above grammar was modified to (file Example3.jj):
void basic_expr() :
{}
{
<ID> "(" expr() ")" // Choice 1
|
"(" expr() ")" // Choice 2
|
"new" <ID> // Choice 3
|
<ID> "." <ID> // Choice 4
}
Then the default algorithm will always choose Choice 1 when the next input token is <ID> and never choose Choice 4 even if the token following <ID> is a ".". More on this later.
You can try running the parser generated from Example3.jj on the input "id1.id2". It will complain that it encountered a "." when it was expecting a "(". Note - when you built the parser, it would have given you the following warning message:
Warning: Choice conflict involving two expansions at
line 25, column 3 and line 31, column 3 respectively.
A common prefix is: <ID>
Consider using a lookahead of 2 for earlier expansion.
Essentially, JavaCC is saying it has detected a situation in your grammar which may cause the default lookahead algorithm to do strange things. The generated parser will still work using the default lookahead algorithm - except that it may not do what you expect of it.
Now consider the following example (file Example 4.jj):
void identifier_list() :
{}
{
<ID> ( "," <ID> )*
}
Suppose the first <ID> has already been matched and that the parser has reached the choice point (the (...)* construct). Here's how the choice determination algorithm works:
while (next token is ",") {
choose the nested expansion (i.e., go into the (...)* construct)
consume the "," token
if (next token is <ID>) consume it, otherwise report error
}
In the above example, note that the choice determination algorithm does not look beyond the (...)* construct to make its decision. Suppose there was another production in that same grammar as follows (file Example5.jj):
void funny_list() :
{}
{
identifier_list() "," <INT>
}
When the default algorithm is making a choice at ( "," <ID> )*, it will always go into the (...)* construct if the next token is a ",". It will do this even when identifier_list was called from funny_list and the token after the "," is an <INT>. Intuitively, the right thing to do in this situation is to skip the (...)* construct and return to funny_list. More on this later.
As a concrete example, suppose your input was "id1, id2, 5", the parser will complain that it encountered a 5 when it was expecting an <ID>. Note - when you built the parser, it would have given you the following warning message:
Warning: Choice conflict in (...)* construct at line 25, column 8.
Expansion nested within construct and expansion following construct
have common prefixes, one of which is: ","
Consider using a lookahead of 2 or more for nested expansion.
Essentially, JavaCC is saying it has detected a situation in your grammar which may cause the default lookahead algorithm to do strange things. The generated parser will still work using the default lookahead algorithm - except that it may not do what you expect of it.
We have shown you examples of two kinds of choice points in the examples above - "exp1 | exp2 | ...", and "(exp)*". The other two kinds of choice points - "(exp)+" and "(exp)?" - behave similarly to (exp)* and we will not be providing examples of their use here.
So far, we have described the default lookahead algorithm of the generated parsers. In the majority of situations, the default algorithm works just fine. In situations where it does not work well, Java Compiler Compiler provides you with warning messages like the ones shown above. If you have a grammar that goes through Java Compiler Compiler without producing any warnings, then the grammar is a LL(1) grammar. Essentially, LL(1) grammars are those that can be handled by top-down parsers (such as those generated by Java Compiler Compiler) using at most one token of LOOKAHEAD.
When you get these warning messages, you can do one of two things.
Option 1
You can modify your grammar so that the warning messages go away. That is, you can attempt to make your grammar LL(1) by making some changes to it.
The following (file Example6.jj) shows how you may change Example3.jj to make it LL(1):
void basic_expr() :
{}
{
<ID> ( "(" expr() ")" | "." <ID> )
|
"(" expr() ")"
|
"new" <ID>
}
What we have done here is to factor the fourth choice into the first choice. Note how we have placed their common first token <ID> outside the parentheses, and then within the parentheses, we have yet another choice which can now be performed by looking at only one token in the input stream and comparing it with "(" and ".". This process of modifying grammars to make them LL(1) is called "left factoring".
The following (file Example7.jj) shows how Example5.jj may be changed to make it LL(1):
void funny_list() :
{}
{
<ID> "," ( <ID> "," )* <INT>
}
Note that this change is somewhat more drastic.
Option 2
You can provide the generated parser with some hints to help it out in the non-LL(1) situations that the warning messages bring to your attention.
All such hints are specified using either setting the global LOOKAHEAD value to a larger value (see below) or by using the LOOKAHEAD(...) construct to provide a local hint.
A design decision must be made to determine if Option 1 or Option 2 is the right one to take. The only advantage of choosing Option 1 is that it makes your grammar perform better. JavaCC generated parsers can handle LL(1) constructs much faster than other constructs. However, the advantage of choosing Option 2 is that you have a simpler grammar - one that is easier to develop and maintain - one that focuses on human-friendliness and not machine-friendliness.
Sometimes Option 2 is the only choice - especially in the presence of user actions. Suppose Example3.jj contained actions as shown below:
void basic_expr() :
{}
{
{ initMethodTables(); } <ID> "(" expr() ")"
|
"(" expr() ")"
|
"new" <ID>
|
{ initObjectTables(); } <ID> "." <ID>
}
Since the actions are different, left-factoring cannot be performed.
You can set a global LOOKAHEAD specification by using the option "LOOKAHEAD" either from the command line, or at the beginning of the grammar file in the options section. The value of this option is an integer which is the number of tokens to look ahead when making choice decisions. As you may have guessed, the default value of this option is 1 - which derives the default LOOKAHEAD algorithm described above.
Suppose you set the value of this option to 2. Then the LOOKAHEAD algorithm derived from this looks at two tokens (instead of just one token) before making a choice decision. Hence, in Example3.jj, choice 1 will be taken only if the next two tokens are <ID> and "(", while choice 4 will be taken only if the next two tokens are <ID> and ".". Hence, the parser will now work properly for Example3.jj. Similarly, the problem with Example5.jj also goes away since the parser goes into the (...)* construct only when the next two tokens are "," and <ID>.
By setting the global LOOKAHEAD to 2, the parsing algorithm essentially becomes LL(2). Since you can set the global LOOKAHEAD to any value, parsers generated by Java Compiler Compiler are called LL(k) parsers.
You can also set a local LOOKAHEAD specification that affects only a specific choice point. This way, the majority of the grammar can remain LL(1) and hence perform better, while at the same time one gets the flexibility of LL(k) grammars. Here's how Example3.jj is modified with local LOOKAHEAD to fix the choice ambiguity problem (file Example8.jj):
void basic_expr() :
{}
{
LOOKAHEAD(2)
<ID> "(" expr() ")" // Choice 1
|
"(" expr() ")" // Choice 2
|
"new" <ID> // Choice 3
|
<ID> "." <ID> // Choice 4
}
Only the first choice (the first condition in the translation below) is affected by the LOOKAHEAD specification. All others continue to use a single token of LOOKAHEAD:
if (next 2 tokens are <ID> and "(" ) {
choose Choice 1
} else if (next token is "(") {
choose Choice 2
} else if (next token is "new") {
choose Choice 3
} else if (next token is <ID>) {
choose Choice 4
} else {
produce an error message
}
Similarily, Example5.jj can be modified as shown below (file Example9.jj):
void identifier_list() :
{}
{
<ID> ( LOOKAHEAD(2) "," <ID> )*
}
Note, the LOOKAHEAD specification has to occur inside the (...)* which is the choice is being made. The translation for this construct is shown below (after the first <ID> has been consumed):
while (next 2 tokens are "," and <ID>) {
choose the nested expansion (i.e., go into the (...)* construct)
consume the "," token
consume the <ID> token
}
We strongly discourage you from modifying the global LOOKAHEAD default. Most grammars are predominantly LL(1), hence you will be unnecessarily degrading performance by converting the entire grammar to LL(k) to facilitate just some portions of the grammar that are not LL(1). If your grammar and input files being parsed are very small, then this is okay.
You should also keep in mind that the warning messages JavaCC prints when it detects ambiguities at choice points (such as the two messages shown earlier) simply tells you that the specified choice points are not LL(1). JavaCC does not verify the correctness of your local LOOKAHEAD specification - it assumes you know what you are doing, in fact, it really cannot verify the correctness of local LOOKAHEAD's as the following example of if statements illustrates (file Example10.jj):
void IfStm() :
{}
{
"if" C() S() [ "else" S() ]
}
void S() :
{}
{
...
|
IfStm()
}
This example is the famous "dangling else" problem. If you have a program that looks like:
"if C1 if C2 S1 else S2"
The "else S2" can be bound to either of the two if statements. The standard interpretation is that it is bound to the inner if statement (the one closest to it). The default choice determination algorithm happens to do the right thing, but it still prints the following warning message:
Warning: Choice conflict in [...] construct at line 25, column 15.
Expansion nested within construct and expansion following construct
have common prefixes, one of which is: "else"
Consider using a lookahead of 2 or more for nested expansion.
To suppress the warning message, you could simply tell JavaCC that you know what you are doing as follows:
void IfStm() :
{}
{
"if" C() S() [ LOOKAHEAD(1) "else" S() ]
}
To force lookahead ambiguity checking in such instances, set the option FORCE_LA_CHECK to true.
Consider the following production taken from the Java grammar:
void TypeDeclaration() :
{}
{
ClassDeclaration()
|
InterfaceDeclaration()
}
At the syntactic level, ClassDeclaration can start with any number of "abstract"s, "final"s, and "public"s. While a subsequent semantic check will produce error messages for multiple uses of the same modifier, this does not happen until parsing is completely over. Similarly, InterfaceDeclaration can start with any number of "abstract"s and "public"s.
What if the next tokens in the input stream are a very large number of "abstract"s (say 100 of them) followed by "interface"? It is clear that a fixed amount of LOOKAHEAD (such as LOOKAHEAD(100) for example) will not suffice. One can argue that this is such a weird situation that it does not warrant any reasonable error message and that it is okay to make the wrong choice in some pathological situations. But suppose one wanted to be precise about this.
The solution here is to set the LOOKAHEAD to infinity - that is set no bounds on the number of tokens to look ahead. One way to do this is to use a very large integer value (such as the largest possible integer) as follows:
void TypeDeclaration() :
{}
{
LOOKAHEAD(2147483647)
ClassDeclaration()
|
InterfaceDeclaration()
}
One can also achieve the same effect with "syntactic LOOKAHEAD". In syntactic LOOKAHEAD, you specify an expansion to try out and it that succeeds, then the following choice is taken. The above example is rewritten using syntactic LOOKAHEAD below:
void TypeDeclaration() :
{}
{
LOOKAHEAD(ClassDeclaration())
ClassDeclaration()
|
InterfaceDeclaration()
}
Essentially, what this is saying is:
if (the tokens from the input stream match ClassDeclaration) {
choose ClassDeclaration()
} else if (next token matches InterfaceDeclaration) {
choose InterfaceDeclaration()
} else {
produce an error message
}
The problem with the above syntactic LOOKAHEAD specification is that the LOOKAHEAD calculation takes too much time and does a lot of unnecessary checking. In this case, the LOOKAHEAD calculation can stop as soon as the token "class" is encountered, but the specification forces the calculation to continue until the end of the class declaration has been reached - which is rather time consuming. This problem can be solved by placing a shorter expansion to try out in the syntactic LOOKAHEAD specification as in the following example:
void TypeDeclaration() :
{}
{
LOOKAHEAD( ( "abstract" | "final" | "public" )* "class" )
ClassDeclaration()
|
InterfaceDeclaration()
}
Essentially, what this is saying is:
if (the nest set of tokens from the input stream are a sequence of
"abstract"s, "final"s, and "public"s followed by a "class") {
choose ClassDeclaration()
} else if (next token matches InterfaceDeclaration) {
choose InterfaceDeclaration()
} else {
produce an error message
}
By doing this, you make the choice determination algorithm stop as soon as it sees "class" - i.e., make its decision at the earliest possible time.
You can place a bound on the number of tokens to consume during syntactic lookahead as follows:
void TypeDeclaration() :
{}
{
LOOKAHEAD(10, ( "abstract" | "final" | "public" )* "class" )
ClassDeclaration()
|
InterfaceDeclaration()
}
In this case, the LOOKAHEAD determination is not permitted to go beyond 10 tokens. If it reaches this limit and is still successfully matching ( "abstract" | "final" | "public" )* "class", then ClassDeclaration is selected.
Actually, when such a limit is not specified, it defaults to the largest integer value (2147483647).
Let us go back to Example1.jj:
void Input() :
{}
{
"a" BC() "c"
}
void BC() :
{}
{
"b" [ "c" ]
}
Let us suppose that there is a good reason for writing a grammar this way (maybe the way actions are embedded). As noted earlier, this grammar recognizes two string "abc" and "abcc". The problem here is that the default LL(1) algorithm will choose the [ "c" ] every time it sees a "c" and therefore "abc" will never be matched. We need to specify that this choice must be made only when the next token is a "c", and the token following that is not a "c". This is a negative statement - one that cannot be made using syntactic LOOKAHEAD.
We can use semantic LOOKAHEAD for this purpose. With semantic LOOKAHEAD, you can specify any arbitrary boolean expression whose evaluation determines which choice to take at a choice point. The above example can be instrumented with semantic LOOKAHEAD as follows:
void BC() :
{}
{
"b"
[ LOOKAHEAD( { getToken(1).kind == C && getToken(2).kind != C } )
<C:"c">
]
}
First we give the token "c" a label C so that we can refer to it from the semantic LOOKAHEAD. The boolean expression essentially states the desired property. The choice determination decision is therefore:
if (next token is "c" and following token is not "c") {
choose the nested expansion (i.e., go into the [...] construct)
} else {
go beyond the [...] construct without entering it.
}
This example can be rewritten to combine both syntactic and semantic LOOKAHEAD as follows (recognize the first "c" using syntactic LOOKAHEAD and the absence of the second using semantic LOOKAHEAD):
void BC() :
{}
{
"b"
[ LOOKAHEAD( "c", { getToken(2).kind != C } )
<C:"c">
]
}
We've pretty much covered the various aspects of LOOKAHEAD in the previous sections. A couple of advanced topics follow. However, we shall now present a formal language reference for LOOKAHEAD in Java Compiler Compiler:
The general structure of a LOOKAHEAD specification is:
LOOKAHEAD( amount,
expansion,
{ boolean_expression }
)
"amount" specifies the number of tokens to LOOKAHEAD,"expansion" specifies the expansion to use to perform syntactic LOOKAHEAD, and "boolean_expression" is the expression to use for semantic LOOKAHEAD.
At least one of the three entries must be present. If more than one are present, they are separated by commas. The default values for each of these entities is defined below:
"amount":
- if "expansion is present, this defaults to 2147483647.
- otherwise ("boolean_expression" must be present then) this
defaults to 0.
Note: When "amount" is 0, no syntactic LOOKAHEAD is performed. Also,
"amount" does not affect the semantic LOOKAHEAD.
"expansion":
- defaults to the expansion being considered.
"boolean_expression":
- defaults to true.
To be done.
To be done.